windows key not working? Fix: Windows Button or Key

windows key not working
Windows

windows key not working? Fix: Windows Button or Key

windows key not working: Are you fed up of your windows key not working? Windows key is the key that we have been using to reach the start menu. On some systems, the key is often used with other keys like F5 or the “prt sc” for refreshing purposes and for taking screenshot respectively. The use of this key is not just limited to these few exercises; it is used for various other purposes and what is to be done if this key stops working. It will be no less than a nightmare, especially in an era where everything and anything is dependent on technology. We need our laptop for almost everything we do and if you are a working person, it becomes impossible to survive without a laptop or computer. So, how are we supposed to resolve this issue of windows key?

Before diving into the solutions, we should first understand how keys work and what can result in a defect in any key on your keyboard.

Reasons why the keys might not be working

There are quite a few factors that affect the functioning of the keyboard. These factors can either be a hardware issue or a software issue. Here are a few factors that cause this issue. We will elaborate on these, in the later section.

The problem can either be in the hardware or the software. It is very simple to identify whether it is a software issue or a hardware issue. One way to identify the issue is to replace the keyboard and see if the other keyboard works. If it works, that signifies that there is some issue in the hardware. If the keyboard still fails to work that definitely means that the issue is in the software.

Here is a way to double check whether the issue is in the software or not. After we press Ctrl + Shift + Esc, it ideally opens up the task manager and if it fails to do so, it means that your software is faulty.

This is the most common way to look at it. Nowadays the keyboards are programmed in such a manner that they can operate in two modes, i.e., the gaming mode and the regular mode. When the keyboard is switched to the gaming mode, some of the keys on your keyboard might function differently or might not function at all. Windows key is one of those keys that stop working when the keyboard is being operated in the gaming mode. Thus, you can try switching it back to the regular mode and it should work. In case, the windows key is still not working, you need to do some further investigation.

One of the viable reasons that might be causing this issue is that the windows key has not been enabled in the Windows Operating System Registry Editor. A similar issue can be observed with other keys which are disabled.

The PCs come with the hardware drivers. The function of device drivers is to establish communication between the different hardware components with the help of certain files. When there is some kind of error or fault within these errors, the communication between the components can be difficult. This might be another reason as to why the windows key cease to work.

To check whether the device drivers are functioning properly or not, you can follow the steps mentioned below:

Step 1: Go to the control panel of your system.

Step 2: After opening the control panel go to the device drivers tab.

Step 3: After the device drivers open, check if the list of hardware components shows any kind of warning sign next to your hardware component (Keyboard in this case).

If there is a warning sign, it means that the device driver is damaged and needs some corrections. You can approach the customer care center of your respective company and get the issue fixed.

In some cases the problem arises because you are using outdated drivers. In this case you are simply required to update the drivers and that should fix the issue.

If you have tried all of the above cases and none of them seem to work, it might be that the keyboard you are using is itself faulty. It might be that it has a faulty design or that the electrical circuits within your keyboard are faulty. If this is the case, then your keyboard might need a replacement altogether or some minor corrections can fix the issue. The best way to figure this out is to visit the nearest customer care center of your respective company and get it fixed.

Customer care provide you an easy fix to every issue with the product you have purchased. Make sure that you avoid going to local vendors to get your problem fixed because they are not at all trustworthy and their services are not reliable. Local vendors are found to sell duplicate and stolen products. They are capable of selling you the second hand product as first hand. To avoid being a victim of such circumstances, make sure you purchase products only from the authorized dealers and the original showrooms and for rectification  of your product, customer care centres are the best alternative as you can rely on them.

You can face issues in any version of the windows. People often complain about windows key not working in windows 10. It might be that the version of the software you are using is creating problem. You can try and update your software, often this solves the issue of the keyboard. If you are still struggling with the key, visit your nearest customer care centres. Customer care centres provide all kinds of technical support you require and they even provide on site services if required. Make sure you purchase the products only form the authorised dealers because once you purchase a duplicate product, you are stuck with it as even the customer care executives can’t help you as you do not have an authentic id to the product.

These factors not only affect the functioning of the windows key. There have been some complaints about the shift key not working in windows 10. These are some of the keys that are most used and if they do not work, they certainly slow down the work flow.

We have discussed enough about the factors that lead to issue in keyboard. Now let’s move to the solutions. How can we fix these issues? Here is how.

As discussed earlier, one of the many reasons that cause the problem is gaming mode. Nowadays the laptops come in two modes, i.e., the gaming mode and the standard mode. When the laptop is being operated in the gaming mode, the functioning of certain keys is completely prohibited and the windows key falls under this category. Now what can be done to resolve this? The one thing that can resolve this issue is to disable the gaming mode in your system and operate it on the regular mode.

Due to the factors mentioned above, people often complain about fn key not working in windows 10. Below mentioned are some ways that can help you resolve your issues with the keyboard.

Steps to follow to disable gaming mode

The gaming laptops come with a key which has the sign of a joystick on it. This is the gaming mode key. This button is more like a switch that can be turned on or off just by sliding. This switch is located right above the function keys. In order to disable the gaming mode, just flip this switch to the left. This method is not a standard method and varies from system to system. In some systems the trick is to use this toggleable button in combination with the F4 key.

Due to the gaming mode, a lot of keys that are used for shortcut stop working. People often complain about the ctrl (control) key not working in windows 10. This can be resolved by disabling the gaming mode.

Some keyboards come with a key which is also referred to as the Win lock which is self explanatory. It locks the windows key and if you press it again, it will enable the windows key.

Corsair keyboards are designed a bit differently. They have different functionalities than the regular ones. It consists of an option with which you can either enable or disable the windows key.

Let’s talk about another kind of keyboard, which is Azio keyboard. In Azio keyboards the FN and F9 keys are required to be pressed simultaneously. These were some of the methods with which you can enable the windows key in different types of keyboards.

The windows key can also be enabled using the registry edit as well.

Steps to enable the windows key using registry edit

  • In the space next to the start button, type “Run” and open the Run tab.
  • As the run dialog box opens up, you are supposed to type “regedt32” and clock on “Ok” button.
  • As the tab opens, go on the windows menu, click the option reading “HKEY_LOCAL_ MACHINE” under local machine.
  • Now go to system> CurrentControlSet > Control folder and open Keyboard Layout folder.
  • Right click on the Scancode Map registry entry and delete it.
  • As the confirmation pop up appears, Select option “Yes” and continue.
  • Restart the system after closing all the open tabs.

The third method to enable the windows key is to re-register all apps.

Steps to re-register all apps

This is done using the power shell command prompt. Here is how to open it. Go to the search menu and type power shell and the search bar displays different options, you have to right click on the option reading “Windows power shell” and click on “Run as administrator”. This will also resolve the issue of shift key not working in windows 10.

Another way to open it is to go to C:> Users> YourUserName >AppData> Roaming> Microsoft> Windows> Start Menu> Programs> Windows PowerShell and then follow the same procedure as above. As the powershell opens, you are supposed to copy and paste this script in it.

Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}

This will trigger the re-registering of all the apps on your system. After the process is complete, restart the system.

How to enable the start menu?

Open the task manager on your system. Simply type “Task manager” in the start menu and hit enter while the very first option in the search result is selected. This will open the Task manager. Another shortcut to open task manager is to press ctrl + shift + esc.

In the top left corner, click on the file tab and select run new task. As the dialog box appears, type “regedit” in the text field and click ok. Now you are supposed to go to HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / Explorer / Advance. Right click and select “New” > “D-word (32-bit) value. Name the new key as “EnableXamlStartMenu”. Restart your system to see if it worked or not.

Re-install your device drivers

If the above methods didn’t work and you failed to enable the start menu, it is possible that the device drivers of the system are faulty. This issue can be resolved by re-installing the device drivers.

Steps to re-install the device drivers

Open the task manager on your system. Simply type “Task manager” in the start menu and hit enter while the very first option in the search result is selected. This will open the Task manager. Another shortcut to open task manager is to press ctrl + shift + esc.

In the top left corner, click on the file tab and select run new task. As the dialog box appears, type “devmgmt.msc” in the text field and click ok. As the tab opens, click the small icon placed to the left of the keyboard and expand this section. Right click on the option that appears after expanding and select “Uninstall device” option. After you select it, a dialog box will appear to re-confirm the uninstallation. Click on “Uninstall” and proceed.

Now when you restart the computer, the new device drivers will be automatically installed.

If summarise the factors that lead to the windows key not working in windows 10 or any other key not working like the function key, shift key, ctrl key or backspace key not working in windows 10 are summarised then we will find out that in most cases, the issue is in the software and can be resolved easily. If you fail to solve it by yourself, you can take your laptop to the nearest customer care centres as they provide 100% technical assistance and resolve all kinds of issues whether it is a software or hardware issue.

The hardware issues are very rare. In case your keyboard has some error in its configuration or the circuit is faulty, the keyboard might need a replacement altogether. The best way to figure out the issue is to visit any authorised dealer or the technical support centres. They will observe the issue in your system closely and resolve it with utmost care. You don ‘t need to worry about anything and the authorised customer care centres are extremely reliable.

Leave your thought here

Your email address will not be published. Required fields are marked *